STEAM DISTRIBUTION AND RADIANT HEAT
STEAM TRAP MAINTENANCE AND REPAIR Requirements: • Rebates are available for steam traps used for space heating. • Surveys are optional. Survey rebates are available only once in a 12-month period per steam system. Survey cost must be shown on the invoice. • To qualify for the survey rebate, customer must repair or replace 90% of traps identified as failed. Customer can provide written explanation for a trap that cannot be repaired or replaced and may still qualify for survey rebate. • Repair rebate is only available for the repair or replacement of traps that have malfunctioned leaking steam. Repair rebate is not available for traps that are failed closed or are plugged. • Offering is for replacing conventional style steam traps. Venturi steam traps are eligible, but encouraged to apply for custom incentives. Custom Venturi trap applications may increase the incentive amount. • Repairs do not need to be made at one time, but only one repair rebate per trap can be applied for in a 12-month period. • Mass replacement of traps can be completed without a survey. Focus on Energy will assume 20% of the traps were leaking and pay a repair rebate for 20% of the total traps replaced. • Steam trap survey and repair work must be recorded in a log sheet and attached to the application in order to be eligible for the survey rebate. Vendor must create and fill in the log as work is completed. • Required fields (minimum): • ID Tag Number • Location Description • Condition of Trap (indicate ONE below): Functioning Properly Malfunctioning - Not Leaking Steam Malfunctioning - Leaking Steam Survey/Repair Date Nominal Steam Pressure Measure Description Code Rebate Unit Steam Trap Survey H2225 $8 Steam Trap Steam Trap Repair, <10 psig H10425 $60 Steam Trap Steam Trap Repair, 10-49 psig H10427 $100 Steam Trap Steam Trap Repair, 50-124 psig H10428 $150 Steam Trap Steam Trap Repair, ≥ 125 psig H10426 $250 Steam Trap STEAM SYSTEM INSULATION Requirements: • This rebate is for adding insulation to uninsulated steam piping, fittings, and/or traps. • Insulation for fittings must be removable and reusable. • Insulation must be ≥1.5 inches for pipes ≤1.5 inches in diameter and ≥3 inches for pipes >1.5 inches in diameter. Measure Description Code Rebate Unit Insulation for Steam Fittings, Natural Gas H2429 $20 Fitting Insulation for Steam Pipe, Natural Gas H2430 $10 Foot of Pipe
INFRARED HEATERS Requirements: • Low-intensity and high-intensity heaters are eligible. • Must have electronic ignition. Measure Description
Code H2422
Rebate
Unit MBh MBh
Infrared Heater Infrared Heater
$7.50 $6.00
N-H2422
14
Powered by FlippingBook