2024 HVAC Catalog

2024 BUSINESS OFFERINGS HVAC

TABLE OF CONTENTS

HOW TO APPLY............................................................................................................3 PARTICIPATION REQUIREMENTS...........................................................................4 INCENTIVE APPLICATION.........................................................................5 HVAC SUPPLEMENTAL DATA SHEET...................................................................7 SAMPLE INVOICE.......................................................................................................31 GLOSSARY...................................................................................................................32 CONVERSIONS..........................................................................................................35 HEATING SYSTEMS...................................................................................10 BOILERS.........................................................................................................................10 BOILER CONTROLS AND BURNERS....................................................................11 HOT WATER AND STEAM DISTRIBUTION SYSTEMS.....................................13 FORCED AIR AND RADIANT HEAT.......................................................................15

INCENTIVE APPLICATION

HEATING SYSTEMS

COOLING SYSTEMS..................................................................................17 DIRECT EXPANSION (DX) SYSTEMS....................................................................17 CHILLERS.................................................................................................................... 20

COOLING SYSTEMS

VENTILATION AND CONTROLS.............................................................23 VENTILATION UPGRADES.....................................................................................23 CONTROLS.................................................................................................................25 VARIABLE FREQUENCY DRIVES.........................................................................28

VENTILATION AND CONTROLS

BUILDING ENVELOPE

BUILDING ENVELOPE..............................................................................30 OVERHEAD DOOR MODIFICATIONS................................................................30

ABOUT FOCUS ON ENERGY®. Focus on Energy works with eligible Wisconsin residents and businesses to install cost-effective energy efficiency and renewable energy projects. Focus on Energy information, resources and financial incentives help to implement projects that otherwise would not get completed, or to complete projects sooner than scheduled. Its efforts help Wisconsin residents and businesses manage rising energy costs, promote in-state economic development, protect our environment, and control the state’s growing demand for electricity and natural gas. For more information, call 800.762.7077 or visit focusonenergy.com.

HOW TO APPLY NEED HELP? CALL 800.762.7077

FOCUS ON ENERGY® makes saving energy and money easy for Wisconsin businesses. Use the information below to help guide your way to savings. For electronic copies of the forms, visit focusonenergy.com/catalogs.

step 1 BEFORE YOU APPLY: Verify customer and product eligibility: m Confirm your gas and/or electric utilities participate in Focus on Energy at focusonenergy.com/utilities. m Read product requirements, both general and technology-specific, in your equipment’s corresponding incentive catalog. m Review the Participation Requirements page. m Review the Terms and Conditions at focusonenergy.com/terms. m View the qualified product lists at focusonenergy.com/qpls. m Applications exceeding $10,000 can request pre-approval. Requests received on or before December 13, 2024, will be pre-approved at 2024 incentive rates. Applications not pre-approved may not receive incentive payment if program funds have been exhausted. Pre-approval is considered complete once an incentive agreement is signed by the customer and returned to Focus on Energy.

step 3 COMPLETE THIS APPLICATION: m All fields on the application are required. Incomplete application(s) cannot be processed. m Complete SECTION 7 with all product information. Use the Business Incentive Product Information Sheet found at focusonenergy.com/catalogs if you need additional lines. m Include project completion date (date the last product was installed). If project is new construction, use the occupancy date. Project is considered complete when products are installed and operational. m Complete the catalog-specific Supplemental Data Sheet for applicable measures. An asterisk (*) next to the code indicates when this is needed. Read the measure requirements in your catalog for directions. m The utility ratepayer must sign and date SECTION 8. m Ensure supporting documents are attached, including itemized invoice(s). m Make a copy of the application and supporting documents for your records. step 4 SUBMIT YOUR APPLICATION: Mail or email your application and all supporting documentation. Applications must be submitted within 60 calendar days of project completion , no later than January 31, 2025.

Qualifying products must be installed by December 31, 2024.

step 2 WHAT YOU’LL NEED: m Incentive Application and Equipment Incentive Catalog(s). m Gas and electric utility account numbers. m Tax ID number. m Invoice MUST include: • Trade Ally name, address, and phone number. • An itemized list of products along with manufacturer name, model number, and quantity. • Itemized purchase price of product/installation. • Job site address. Reminder: Incentives are capped at 100% of equipment cost unless otherwise noted. Equipment cost is the amount paid by the customer for qualifying equipment, excluding any Focus on Energy incentive credit, shipping, and sales tax. Like-for-like equipment replacement due to recall, warranty replacement, etc. is not eligible for an incentive. m Manufacturer specifications (when required) — MUST include: • Full model number. • Energy performance information. m Additional documentation (when required).

MAIL: Focus on Energy 725 W. Park Avenue Chippewa Falls, WI 54729 EMAIL: business@focusonenergy.com

PARTICIPATION REQUIREMENTS NEED HELP? Call 800.762.7077

Use the eligibility requirements below to see if your business qualifies for program incentives. You can also visit focusonenergy.com to find savings opportunities specific to your business. CUSTOMER ELIGIBILITY

CUSTOM INCENTIVES Does your project not fit in one of our prescriptive offers? Custom project incentives are calculated on a case-by-case basis for non- standard technologies and are based on estimated first-year energy savings. Whether you operate a large industrial facility, a chain store or franchise, an office, school or municipal building, a farm, or anything in between, we can show you how to be more energy efficient — and how to save on the cost of making improvements. Before purchasing equipment or proceeding with upgrades, you must contact an Energy Advisor from Focus on Energy. Your Energy Advisor will help you determine if your project qualifies for a Focus on Energy custom incentive and will help you obtain necessary pre-approval. Refer to the blue ‘Custom Project Idea’ boxes throughout the catalog for ideas. To get started with your custom project, download and complete the Custom Incentive Guide at focusonenergy.com/business/equipment-replacement .

Incentives included in this catalog are available to all nonresidential customers (agriculture, commercial, government, industrial, and schools) located in a participating utility territory. To see if your utility participates, go to focusonenergy.com/utilities . Typical facility types include: u School facilities (e.g., public and private K-12, technical colleges, colleges, universities). u Commercial facilities (e.g., banks, hotels, offices, convenience stores/gas stations, manufacturing, breweries, restaurants). u Healthcare facilities (e.g., nursing homes/skilled nursing, Community-Based Residential Facilities (CBRF), hospitals). u Multifamily properties should refer to focusonenergy.com/multifamily for available incentives and offerings for common areas and individual units. NEW CONSTRUCTION & MAJOR RENOVATIONS Qualifying projects are new, stand-alone commercial and industrial facilities, additions to existing facilities, and major renovations due to a change in the use of space (e.g., a warehouse to office). Available new construction incentives include prescriptive incentives found in this catalog and Whole Building Design incentives found at focusonenergy.com/newconstruction . Reach out to an Energy Advisor from Focus on Energy to help identify what is best for your project.

New Construction & Major Renovations measures and incentives will appear in a blue table , while Equipment Upgrades & Retrofits measures and incentives will appear in a green table . If a measure does not have a blue table ,, New Construction & Major Renovations incentives are not offered for that measure.

INFORMATION AND REQUIREMENTS Before you start your project, make sure you are familiar with participation requirements, program information and Terms and Conditions.

General Terms and Conditions Review the Focus on Energy Terms and Conditions at focusonenergy.com/terms or call 800.762.7077 to request a copy. Incentive Limits Incentives are limited to $300,000 per project and $400,000 per customer per calendar year for all Focus on Energy incentives (prescriptive and custom). Depending on the business tax classification of the payee, the entity receiving the incentive payment may receive IRS form 1099 for incentives totaling over $600 in a calendar year. Trade Ally Information A Trade Ally represents the company who provided/installed the equipment for a project or performed the service for which a Customer is seeking an incentive. Trade Allies who have signed an agreement with Focus on Energy are allowed to enjoy certain program benefits, one of which is to receive direct payment of incentives at the Trade Ally’s request. Incentives can only be paid directly to a registered Trade Ally who has a

W-9 on file with Focus on Energy. For more information on becoming a registered Trade Ally, visit focusonenergy.com/tradeally . The Federal Employer Identification Number (FEIN) and Tax Classification of the Trade Ally is required IF the incentive is paid directly to the Trade Ally. In this scenario, the credit must be clearly labeled as the Focus on Energy incentive and deducted from the amount due on the Customer’s invoice. If your project was completed by more than one Trade Ally (example, equipment was purchased from one Trade Ally but installed by another Trade Ally) and the incentive is being paid to you the Customer, enter the information of the Trade Ally who installed your equipment in Section 4: Trade Ally Information. If the equipment was self-installed, enter the information of the Trade Ally from whom you purchased the equipment. Assignment of Incentives to Other Payee The Customer for the project site listed on the application may assign their right to participate and receive incentives to Other Payee. The Customer must sign Section 8 and identify the Other Payee in Section 5.

INCENTIVE APPLICATION FOR PROJECTS COMPLETED BY 12/31/2024

section 4 TRADE ALLY INFORMATION _______________________________________________________ TRADE ALLY CONTACT NAME _______________________________________________________ PRIMARY PHONE # EMAIL ADDRESS _______________________________________________________ TRADE ALLY COMPANY NAME _______________________________________________________ ADDRESS _______________________________________________________ CITY STATE ZIP section 5 BUSINESS PAYMENT INFORMATION Payee is responsible for any associated tax consequences. Make incentive check payable to: q Customer q Trade Ally q Other Payee If Other Payee is selected, the relationship to the utility account holder must be identified below: q Tenant q Building Owner q Other (specify) _______________ For All Payees Mail check to: q Customer Legal Address q Job Site Address q Trade Ally Address q Alternate Address _______________________________________________________ COMPANY NAME _______________________________________________________ ADDRESS _______________________________________________________ CITY STATE ZIP _______________________________________________________ ATTENTION TO (OPTIONAL) For Trade Ally and Other Payees Trade Allies must be registered with the Program and have a current W-9 on file to receive payment. Tax Identification Number (Check one) q FEIN or q SSN If you use a Social Security Number (SSN) as your Tax Identification Number, do not provide it below. You will be contacted by the Program via email to provide a copy of your W-9 using a secure online portal, if it is not already on file. You must list an email address below. _______________________________________________________ FEIN Tax Classification of Payee (Check one. Required for all businesses, including nonprofits.) q Sole Proprietorship q S Corporation q Partnership q C Corporation q LLC - S Corp q LLC - Partnership q LLC - C Corp q Single-Member LLC q Other ____________________________ Payee Contact Information _______________________________________________________ NAME EMAIL ADDRESS

Complete all sections. Incomplete applications cannot be processed and will delay payment of incentives. Applications must be submitted within 60 days of completed project installation , no later than January 31, 2025. For additional copies of this form, visit focusonenergy.com/catalogs . section 1 ACCOUNT AND CUSTOMER INFORMATION Tax Identification Number (Check one) q FEIN or q SSN If you use a Social Security Number (SSN) as your Tax Identification Number, do not provide it below . You will be contacted by the Program via email to provide a copy of your W-9 using a secure online portal, if it is not already on file. You must list an email address in Section 3. _______________________________________________________ FEIN TAX CLASSIFICATION OF CUSTOMER (Check one. Required for all businesses, including non-profits.) q Sole Proprietorship q S Corporation q Partnership q C Corporation q LLC - S Corp q LLC - Partnership q LLC - C Corp q Single-Member LLC q Other ____________________________ _______________________________________________________ OWNER NAME (REQUIRED IF SSN IS USED AS TAX IDENTIFICATION NUMBER) _______________________________________________________ COMPANY NAME _______________________________________________________ LEGAL ADDRESS (AS SHOWN ON COMPANY W-9) _______________________________________________________ CITY STATE ZIP _______________________________________________________ WHO DID YOU WORK WITH FROM FOCUS ON ENERGY? (CONTACT NAME) section 2 JOB SITE INFORMATION (Refer to your utility bills for account numbers below.) _______________________________________________________ JOB SITE BUSINESS NAME _______________________________________________________ ELECTRIC UTILITY AT JOB SITE ELECTRIC ACCOUNT # _______________________________________________________ GAS UTILITY AT JOB SITE GAS ACCOUNT # q JOB SITE ADDRESS IS SAME AS LEGAL ADDRESS q JOB SITE ADDRESS IS DIFFERENT (COMPLETE BELOW) _______________________________________________________ JOB SITE ADDRESS _______________________________________________________ CITY STATE ZIP section 3 CUSTOMER CONTACT INFORMATION _______________________________________________________ JOB SITE CUSTOMER CONTACT NAME _______________________________________________________ PRIMARY PHONE # EMAIL ADDRESS q I opt in to receive program updates. Preferred method of contact: q Call q Email q Text If Focus on Energy has a question about this application, we should contact: q Customer q Trade Ally q Other_________________

section 6 BUSINESS PROPERTY TYPE Select one only. If applying for both existing and new construction equipment incentives, please complete two separate applications. q Equipment Upgrades & Retrofits q New Construction & Major Renovations Select one (1) property type that best describes your business: q Agriculture Producer q Dairy - Traditional q Dairy - Robotic q Other: ________________ q Education q Financial Institution q Government q Grocery/Convenience Store q Health Services q Hotels & Lodging q Information, Technical & Scientific Services q Manufacturing (product): ___________________ q Multifamily q Office q Religious & Spiritual Organization q Restaurant q Retail q Vehicles Sales/Service q Water/Wastewater q Other: __________________ q If Dairy, what is the average number of cows being milked daily? _____________ section 7 INCENTIVE PRODUCT INFORMATION Refer to: • Applicable incentive catalog at focusonenergy.com/catalogs for incentive codes, incentive per unit, and product eligibility requirements. q With K+ Daily Education q No K+ Daily Education

• focusonenergy.com/qpls for qualified products lists. • Your invoice for Manufacturer and Model Number. • Business Incentive Product Information Sheet at focusonenergy.com/catalogs if additional lines are needed.

/ /

PROJECT COMPLETION DATE:

REQUESTED INCENTIVE (A X B)

INCENTIVE CODE

# OF UNITS (A)

INCENTIVE PER UNIT (B)

UNIT MEASURE

MANUFACTURER NAME

MODEL #

(Example) L3111

STARK LIGHTING

LED5VZP

Fixture

$ 20.00

$ 200.00

$ $ $ $ $ $ $ $

Manufacturer Specifications Attached

Subtotal from Incentive Product Information Sheet (if applicable) $

(if applicable): Yes m

Itemized Invoice(s) Attached: Yes m

INCENTIVE TOTAL* $

section 8 CUSTOMER SIGNATURE

I, the undersigned Customer, agree the stated energy efficiency measure(s) was (were) installed at the job site address listed above as part of the Focus on Energy Program. I have read and agreed to the provisions set forth herein and to the Terms and Conditions posted at focusonenergy.com/terms . I understand Focus on Energy may revise these Terms and Conditions at any time, and I will not be notified in the event changes are made. To the best of my knowledge, the statements made on this application are complete, true, and correct, and I have submitted the appropriate supporting documentation to receive an incentive. If the Customer is identified as the Payee in Section 5, the following certifications are required for this form to substitute for the Internal Revenue Service (IRS) form W-9. Under penalty of perjury, I certify that:

• The number shown on this form is the correct taxpayer identification number. • I am not subject to backup withholding because: (a) I am exempt from backup withholding, or (b) I have not been notified by the IRS that I am subject to backup withholding as a result of failure to report all interest or dividends, or (c) the IRS has notified me that I am no longer subject to backup withholding. • I am a U.S. person. The IRS does not require my consent to any provision of this document other than the certifications required to avoid backup withholding.

SIGN HERE

______________________________________________________________________________________________________________ CUSTOMER SIGNATURE NAME (PRINT) DATE

Submit applications and supporting documentation to:

Focus on Energy 725 W. Park Avenue Chippewa Falls, WI 54729 business@focusonenergy.com

MAIL:

*Incentive may be adjusted based on project caps. See measure requirements and Terms and Conditions for more information.

EMAIL:

2024 HVAC INCENTIVE CATALOG SUPPLEMENTAL DATA SHEET THIS FORM MUST BE ATTACHED TO COMPLETED INCENTIVE APPLICATION AND SUBMITTED TOGETHER. FOR PROJECTS INSTALLED BY 12/31/2024. NEED HELP? CALL 800.762.7077

HOW TO FILL OUT THIS FORM Refer to the HVAC Incentive Catalog for measure requirements and information. Complete the table corresponding to the measure in the catalog. Attach this form to a completed Incentive Application and submit together.

CUSTOMER INFORMATION

JOB SITE BUSINESS NAME

JOB SITE ADDRESS

TRADE ALLY NAME

A1 DIRECT-FIRED MAKE-UP AIR UNITS (CONSTANT VOLUME) — INCENTIVE CODE: H5081

PAGE 16

OUTSIDE AIR FLOW (CFM)

DISCHARGE AIR TEMP (°F)

WEEKDAY START TIME

WEEKDAY END TIME

SATURDAY START TIME

SATURDAY END TIME

SUNDAY START TIME

SUNDAY END TIME

EQUIP #

(Example) MAU 1

5,000

7:00 AM 10:00 PM 8:00 AM

2:00 PM

Off

A2 DIRECT-FIRED MAKE-UP AIR UNITS (VARIABLE AIR VOLUME) — INCENTIVE CODE: H10030

PAGE 16

OPERATION (ALL YEAR/ HEAT ONLY)

OUTSIDE AIR FLOW (CFM)

DISCHARGE AIR TEMP (°F)

WEEKDAY START TIME

WEEKDAY END TIME

SATURDAY START TIME

SATURDAY END TIME

SUNDAY START TIME

SUNDAY END TIME

SUPPLY FAN (HP)

EQUIP #

(Example) MAU 1

5,000

7:00 AM 10:00 PM 8:00 AM 2:00 PM

Off

7.5

All Year

B1 AIR CONDITIONING SPLIT, PACKAGED, AND AIR SOURCE HEAT PUMP SYSTEMS (≥ 5.42 TONS) INCENTIVE CODE: H4368, H4369, H4370, H4371, H10025, H10026, H10027

PAGE 18-19

(B) AHRI RATED PART LOAD EFFICIENCY (IEER, 2 DECIMALS)

(A) AHRI RATED CAPACITY (TONS, 2 DECIMALS)

(D) DELTA EFFICIENCY (B - C)

(E) ADDITIONAL INCENTIVE (D X $/TON)

(F) BASE INCENTIVE ($/TON)

(G) INCENTIVE RATE ($/TON) (E + F)

REQUESTED INCENTIVE* (A X G)

EQUIP #

(Example) AC 1

15.00

16.00

15.40

0.6

$25

$28

$420

* Focus on Energy may adjust total incentive based on project caps. See measure requirements and Terms and Conditions for more information.

AIR SOURCE HEAT PUMP SYSTEM (≥ 5.42 TONS)

PAGE 18-19

INCENTIVE CODE: H10025, H10026, H10027 EQUIP #

EXISTING HEAT SOURCE (NG, ELECTRIC RESISTANCE, HEAT PUMP)

EXISTING NG THERMAL EFFICIENCY (IF APPLICABLE) (%)

(Example) HP 1

B3 SPLIT SYSTEM AIR CONDITIONING — CONDENSING UNIT ONLY — INCENTIVE CODE: H3909

PAGE 19

(B) AHRI RATED FULL LOAD EFFICIENCY (EER, 2 DECIMALS)

(A) AHRI RATED CAPACITY (TONS, 2 DECIMALS)

(D) DELTA EFFICIENCY (B - C)

(E) ADDITIONAL INCENTIVE (D X $/TON)

(F) BASE INCENTIVE ($/TON)

(G) INCENTIVE RATE ($/TON) (E + F)

REQUESTED INCENTIVE* (A X G)

EQUIP #

(Example) AC 1

15.00

12.00

11.50 11.50 11.50 11.50 11.50 11.50

0.5

$2.50

$20

$22.50

$337.50

CHILLERS (BUILDING COOLING LOAD) —

PAGES 20-22

INCENTIVE CODE: H4712, H4713, H4714, H4715, H4716, H4717, H4718, H4719, H4720, H4721, H4722, H4723, H4724, H4725, H4726, H4727, H4728, H4729, H4730, H4731, H4732, H4733, H4734, H4735

BUILDING/SPACE DESIGN COOLING LOAD (TONS)

CHILLER LOCKOUT TEMPERATURE (°F)

CODE COMPLIANCE PATH: A OR B

EQUIP TYPE

BASE OR TRIM CHILLER?

(Example) Air-Cooled

Base

53 °F

Path A

CHILLERS (EQUIPMENT PERFORMANCE) —

PAGE 20-22

INCENTIVE CODE: H4712, H4713, H4714, H4715, H4716, H4717, H4718, H4719, H4720, H4721, H4722, H4723, H4724, H4725, H4726, H4727, H4728, H4729, H4730, H4731, H4732, H4733, H4734, H4735

(B) MAX FULL LOAD (KW/TON) (FROM MEASURE DESCRIPTION PG 21-23)

(D) MAX PART LOAD (IPLV) (KW/TON) (FROM MEASURE DESCRIPTION PG 21-23)

(E) AHRI RATED PART LOAD EFFICIENCY (IPLV) (KW/TON, 3 DECIMALS)

(I) INCENTIVE RATE ($/TON) (G + H)

(A) AHRI RATED CAPACITY (TONS, 3 DECIMALS)

(F) DELTA

(G) ADDITIONAL INCENTIVE ($/TON)

(H) BASE INCENTIVE ($/TON)

REQUESTED INCENTIVE* (A X I)

EQUIP #

EFFICIENCY: ((B - C) + (D - E))

$18

(Example) Chiller 1

95.000

1.160

1.120

0.880

0.840

0.080

$10

$1,710

D ENERGY RECOVERY VENTILATOR (ERV) — INCENTIVE CODE: H2314, H5082

PAGE 23

COOLING SYSTEM EFFICIENCY (KW/TON OR EER, 2 DECIMALS)

AHRI NET TOTAL SUMMER EFFECTIVENESS %

AHRI NET TOTAL WINTER EFFECTIVENESS %

HEATING SYSTEM EFFICIENCY (%)

HOURS OF OPERATION (HRS/WK)

SUPPLY AIRFLOW (AHRI LISTED CFM)

EQUIP #

(Example) ERV 1

60 hrs/wk

2,000

81%

77%

80%

1.20 kW/ton

* Focus on Energy may adjust total incentive based on project caps. See measure requirements and Terms and Conditions for more information.

E ADVANCED ROOFTOP UNIT CONTROLLERS — INCENTIVE CODE: H3964

PAGE 25

WEEKDAY OPEN / CLOSE TIMES

SATURDAY OPEN / CLOSE TIMES

SUNDAY OPEN / CLOSE TIMES

NOMINAL COOLING CAPACITY (TONS)

ECONOMIZER OPERATIONAL? (Y/N)

HEATER TYPE (NATURAL GAS OR ELECTRIC)

EQUIP #

FAN HP

(Example) RTU 1

15.00

Natural gas

Yes

7 AM / 9 PM

8 AM / 10 PM

11 AM / 7 PM

F1 DEMAND CONTROLLED VENTILATION (DCV) — INCENTIVE CODE: H2853 (DCV FOR MULTIPLE ZONE)

PAGE 26

(A) EXISTING MIN OUTSIDE AIR FLOW (CFM)

(B) NEW MIN OUTSIDE AIR FLOW (CFM)

HOURS OF OPERATION/ WEEK

OUTSIDE AIR FLOW REDUCED (CFM) (A-B)

SPACE HEATING EFF (%)

AREA SERVED TYPE

AHU COOLING SIZE (TONS)

SPACE COOLING (Y/N)

EQUIP #

(Example) DCV 1

Yes

83%

Office

5,000

3,000

2,000

F2 DEMAND CONTROLLED VENTILATION (DCV) — INCENTIVE CODE: H3266 (DCV FOR SINGLE ZONE)

PAGE 26

EXISTING ECONOMIZER (DB, ENTHALPY)

EXISTING AHU CONTROLS (NO SETBACK, EMS/T-STAT)

AREA SERVED TYPE

SPACE COOLING (Y/N)

AHU COOLING SIZE (TONS)

AREA SERVED (SQ FT)

EQUIP #

(Example) DCV 1

Yes

Office

12.00

10,000

T-stat

G GUEST ROOM ENERGY MANAGEMENT CONTROLS — INCENTIVE CODE: H2374

PAGE 27

COOLING EFFICIENCY W/UNITS

COOLING SYSTEM SOURCE

COOLING CAPACITY PER ROOM (TONS)

HEATING EFFICIENCY W/UNITS

HEATING SYSTEM SOURCE

HEATING CAPACITY PER ROOM (MBH)

HVAC SYSTEM TYPE

# OF ROOMS

(Example) Fan Coil Unit

1.2 kW/ton

Air-Cooled Chiller

0.75

90%

Boiler

H VARIABLE FREQUENCY DRIVES — INCENTIVE CODE: H2640, H2641, H2643, H2644, H2646, H2726

PAGE 28

EQUIPMENT OPERATING HOURS (2,000 HR/YR MIN)

REQUESTED INCENTIVE* (QTY X HP X $/HP)

VFD APPLICATION

CONTROLS BEFORE VFD

HP CONTROLLED BY VFD

VFD #

QUANTITY

(Example) AHU-1a

HVAC Fan

Inlet Guide Vanes

2,500

$1,200

* Focus on Energy may adjust total incentive based on project caps. See measure requirements and Terms and Conditions for more information.

HEATING SYSTEMS BOILERS

General Requirements: Only natural gas equipment is eligible for incentives. Boilers fueled by electric, propane, or oil are NOT eligible for incentives. Redundant or backup boilers do not qualify. Condensing boilers (≥90% thermal efficiency) will provide maximum efficiency only if the return water temperature is cool enough to condense flue gases. If the heating system configuration cannot provide necessary operating conditions to the boiler, selection of a non-condensing or near-condensing boiler may be more appropriate. HOT WATER BOILERS Requirements: • Boiler incentives are only available for equipment used in space heating applications. Boilers used for only domestic hot water heating and industrial or process heating are not eligible for this incentive but may qualify for a custom incentive. • Space heating boilers also used for DHW may be eligible for incentives but are subject to requirements. • In plant systems, boilers are eligible for incentives only if their primary use is space heating. • A boiler replacing a space heating and indirect DHW system will use the capacity of the existing space heating and DHW systems to estimate the percent of capacity used for space heating to determine incentive. • Boilers that only serve DHW are not eligible for the space heating incentives. • Boiler efficiency will be verified using the AHRI database (see ahridirectory.org). If the boiler is not listed in the AHRI database, provide a boiler specification sheet with boiler input and output ratings and thermal efficiency. • Steam boilers do not meet efficiency requirements and are not eligible for this incentive but may qualify for a custom incentive. Hot water boiler ≥90% thermal efficiency replacing a steam boiler is eligible. • If the heating system configuration is such that the boiler needs to operate at a high hot water temperature which prevents the flue gases from condensing (as described above in the General Requirements), then the boiler is not eligible.

• Boilers must be capable of capacity modulation. • Do not round AHRI capacity to a whole number.

EQUIPMENT UPGRADES AND RETROFITS Measure Description

Code

Incentive

Unit

H3276

MBh

Hot Water Boilers ≥300 MBh input, ≥90% Thermal Efficiency

NEW CONSTRUCTION AND MAJOR RENOVATIONS Measure Description

Code

Incentive

Unit

N-H3276

MBh

Hot Water Boilers ≥300 MBh input, ≥90% Thermal Efficiency

CUSTOM PROJECT IDEA Talk to your Energy Advisor about custom incentives that may be available for reducing energy waste by installing a supply air reset program to your AHU to better match building load and minimize simultaneous heating and cooling.

BOILER CONTROLS AND BURNERS

GENERAL REQUIREMENTS: Only natural gas equipment is eligible for incentives. Equipment added to boilers fueled by electric, propane, or oil is NOT eligible for incentives. Equipment added to redundant or backup boilers does not qualify.

OUTSIDE AIR RESET/CUTOUT CONTROLS Requirements: • Outside air temperature boiler reset and cutout control incentives are for retrofit projects only. New boilers equipped with these controls do not qualify. • System must have an outdoor temperature sensor installed in a shaded location on the north side of the building. • System must be set up so the minimum temperature is less than 10°F above boiler manufacturer’s recommended minimum return temperature (unless unusual circumstances require a higher setting). • For controls on multiple boilers to qualify, control strategy must stage the lag boiler(s) only after the first boiler stage(s) fail to maintain the water temperature called for by the reset control. • Provide input capacity of boilers (in MBh) controlled with outside air reset and cutout controls per the example below. EQUIPMENT UPGRADES AND RETROFITS Measure Description Code Incentive Unit Outside Air Reset/Cutout Controls H2221 $70 Control

Outside Air Reset/Cutout Controls Example Use this example when applying for outside air reset/cutout controls which also requires boiler capacity in MBh. Reference this table when filling out SECTION 7 on the Incentive Application. EXAMPLE

TOTAL INCENTIVE (A X B)

INCENTIVE CODE

MANUFACTURER NAME

UNIT MEASURE

# OF UNITS (A)

INCENTIVE PER UNIT (B)

MODEL #

H2221

ABC Controls

OA1234

Control

$70

--------

Boiler Capacity MBh

500

--------

BOILER COMBUSTION UPGRADES Requirements: • Boiler must be natural gas-fired, forced-draft boiler used for space heating that operates a minimum of 4,000 hours per year. • Installation on redundant or backup boilers does not qualify for an incentive. • Boiler input capacity must be entered in boiler horsepower (BHP). To convert, use 1 BHP = 33.476 MBh. High turndown burner must be able to provide efficient combustion at a 10:1 turndown ratio or greater. The turndown ratio must be clearly shown on a manufacturer’s spec sheet or similar documentation. • High turndown burner incentives (H2203 and H5237) are eligible on boilers ≤ 1,000 BHP. Boilers > 1,000 BHP may be eligible for custom incentives. • Invoices must be attached and include the manufacturer name and model number of linkageless controls, O 2 trim, and high turndown burner equipment. EQUIPMENT UPGRADES AND RETROFITS Measure Description Code Incentive Unit Linkageless Controls H2205 $18 BHP

O 2 Trim Controls

H2206

BHP

High Turndown Burner, Retrofit on Existing Boiler

H2203

$12

BHP

High Turndown Burner, New Boiler Replacement BHP Incentive amount is limited to 50% of the project cost, including equipment and external labor (internal labor eligible for schools and government customers). NEW CONSTRUCTION AND MAJOR RENOVATIONS Measure Description Code Incentive Unit High Turndown Burner, New Construction N-H5237 $12 BHP Incentive amount is limited to 50% of the project cost, including equipment and external labor (internal labor eligible for schools and government customers). H5237 $12

HOT WATER AND STEAM DISTRIBUTION SYSTEMS

GENERAL REQUIREMENTS : Only natural gas equipment is eligible for incentives. Steam fueled by electric, propane, or oil is NOT eligible for incentives. STEAM TRAP MAINTENANCE AND REPAIR Requirements: • Incentives are available for steam traps within a HVAC system used for space heating. For industrial process steam traps, use the Process Incentive Catalog. • Surveys are optional. A customer may apply for the repair incentive only to repair or replace known failed steam traps. Survey incentives are available only once in a 12-month period per steam system. Survey cost must be shown on the invoice. • To qualify for the survey incentive, customer must repair or replace 90% of traps identified as failed. Customer can provide written explanation for a trap that cannot be repaired or replaced and may still qualify for survey incentive. • Repair incentive is only available for the repair or replacement of traps that have malfunctioned and are leaking steam. Repair incentive is not available for traps that are failed closed or are plugged. • Repairs do not need to be made at one time, but only one repair incentive per trap can be applied for in a 12-month period. • Mass replacement of traps can be completed without condition assessment. Focus on Energy will assume 20% of traps were leaking and pay a repair incentive for 20% of the total traps replaced (rounded to the nearest whole number) and no survey incentive. • Steam trap survey and repair work must be recorded in a log sheet and attached to the application in order to be eligible for the survey incentive. Vendor must create and fill in the log as work is completed. Required fields (minimum) : • ID Tag Number • Location Description • Nominal Steam Pressure • Condition of Trap (indicate ONE below):  Functioning Properly  Malfunctioning - Not Leaking Steam  Malfunctioning - Leaking Steam • Trap Type • Survey/Repair Date • Orifice Size (if repaired or replaced)

EQUIPMENT UPGRADES AND RETROFITS Measure Description

Code

Incentive

Unit

Steam Trap Survey

H2225 H4004 H4005 H4006 H4007 H4008 H4009 H4010 H4011 H4012 H4013 H4014 H4015 H4944 H4945 H4946 H4947

Steam Trap Steam Trap Steam Trap Steam Trap Steam Trap Steam Trap Steam Trap Steam Trap Steam Trap Steam Trap Steam Trap Steam Trap Steam Trap Steam Trap Steam Trap Steam Trap Steam Trap

< 10 psig General Heating Steam Trap, ≤ 7/32” Orifice < 10 psig General Heating Steam Trap, 1/4” Orifice < 10 psig General Heating Steam Trap, 5/16” Orifice < 10 psig General Heating Steam Trap, ≥ 3/8” Orifice 10-49 psig General Heating Steam Trap, ≤ 7/32” Orifice 10-49 psig General Heating Steam Trap, 1/4” Orifice 10-49 psig General Heating Steam Trap, 5/16” Orifice 10-49 psig General Heating Steam Trap, ≥ 3/8” Orifice 50-124 psig General Heating Steam Trap, ≤ 7/32” Orifice 50-124 psig General Heating Steam Trap, 1/4” Orifice 50-124 psig General Heating Steam Trap, 5/16” Orifice 50-124 psig General Heating Steam Trap, ≥ 3/8” Orifice ≥ 125 psig General Heating Steam Trap, ≤ 7/32” Orifice ≥ 125 psig General Heating Steam Trap, 1/4” Orifice ≥ 125 psig General Heating Steam Trap, 5/16” Orifice ≥ 125 psig General Heating Steam Trap, ≥ 3/8” Orifice

$35 $35 $35 $35 $60 $60 $60 $60 $90 $90 $90 $90 $150 $150 $150 $150

STEAM SYSTEM INSULATION Requirements: • This incentive is for adding insulation to uninsulated steam piping and/or fittings (including traps). • Insulation for fittings must be removable and reusable.

• For businesses: steam piping insulation must be ≥1.5 inches for pipes <1.5 inches in diameter and ≥3 inches for pipes >1.5 inches in diameter. • Steam system being insulated must be used for space heating applications. Industrial process applications may be eligible for a custom incentive. EQUIPMENT UPGRADES AND RETROFITS Measure Description Code Incentive Unit Insulation for Steam Fittings, Natural Gas H2429 $10.00 Fitting

Insulation for Steam Pipe, Natural Gas

H2430

$2.50

Foot of Pipe

FORCED AIR AND RADIANT HEAT

General Requirements: Only natural gas equipment is eligible for incentives (and electric equipment if specifically allowed in the requirements below). Equipment fueled by propane or oil is NOT eligible for incentives. Incentives are only available for equipment used in space heating applications. Equipment serving process or other loads does not qualify.

INFRARED HEATERS Requirements: • Both low-intensity and high-intensity heaters are eligible. • Must have electronic ignition. • Must be vented per manufacturer’s requirements. • Low-intensity heaters must use outside non-conditioned combustion air. • Excludes outdoor patio heating applications. • Replacement of an existing infrared heater does not qualify. EQUIPMENT UPGRADES AND RETROFITS Measure Description

Code

Incentive

Unit

Infrared Heater

H2422

$4.50

MBh

NEW CONSTRUCTION AND MAJOR RENOVATIONS Measure Description

Code

Incentive

Unit

Infrared Heater

N-H2422

$3.00

MBh

UNIT HEATERS Requirements: • Unit heater must be an upgrade from a standard efficiency (typically 80%-84% thermal efficiency) unit heater.

• Steam or hot water coils/systems are not eligible. Natural gas fired only. • Must be vented and condensate drained per manufacturer specifications. • Direct fired rooftop units/make-up air units are not eligible for this incentive. • Must replace an existing non-condensing unit heater or be installed instead of a non-condensing unit heater. • Provide a manufacturer’s specification sheet to document the features and efficiency level of the unit heater including input capacity in MBh. EQUIPMENT UPGRADES AND RETROFITS Measure Description Code Incentive Unit Unit Heater, ≥90% Thermal Efficiency H5436 $2.50 MBh

NEW CONSTRUCTION AND MAJOR RENOVATIONS Measure Description

Code

Incentive

Unit

Unit Heater, ≥90% Thermal Efficiency

N-H5436

$1.25

MBh

PACKAGED TERMINAL HEAT PUMPS (PTHP) Requirements: • Unit must be AHRI listed as a Commercial PTHP. • Eligibility for PTHP measures is based on customer having an eligible electric provider. • Must replace or be instead of a Packaged Terminal Air Conditioner (PTAC). Replacement of existing PTHP does NOT qualify.

• Window and through-the-wall air conditioners/heat pumps do not qualify. • The equipment size category (BTUh) is the cooling capacity value of the unit. • Must meet both heating and cooling specifications for the equipment size category. • All efficiency ratings will be verified using the AHRI database (ahridirectory.org). EQUIPMENT UPGRADES AND RETROFITS Measure Description

Code

Incentive

Unit

PTHP <8,000 BTUh, ≥10.7 EER, and ≥3.1 COP

H2699

$75

PTHP

PTHP 8,000-9,999 BTUh, ≥10.4 EER, and ≥3.0 COP

H2702

$75

PTHP

PTHP 10,000-12,999 BTUh, ≥9.9 EER, and ≥2.9 COP

H2701

$75

PTHP

PTHP ≥13,000 BTUh, ≥9.3 EER, and ≥2.9 COP

H2700

$75

PTHP

NEW CONSTRUCTION AND MAJOR RENOVATIONS Measure Description

Code

Incentive

Unit

PTHP <8,000 BTUh, ≥12.7 EER, and ≥3.1 COP

N-H2699

$65

PTHP

PTHP 8,000-9,999 BTUh, ≥12.1 EER, and ≥3.0 COP

N-H2702

$65

PTHP

PTHP 10,000-12,999 BTUh, ≥10.9 EER, and ≥2.9 COP

N-H2701

$65

PTHP

PTHP ≥13,000 BTUh, ≥10.3 EER, and ≥2.9 COP

N-H2700

$65

PTHP

DIRECT-FIRED MAKE-UP AIR UNITS Requirements:

• Complete Table A1 for Code H5081 and A2 for Code H10030 of the “HVAC Incentive Catalog Supplemental Data Sheet” for these measures. • Incentive is available for upgrading (or installing instead of) indirect fired make-up air units or rooftop units which are approximately 80% efficient.

• Replacement of an existing direct-fired make-up air unit is not eligible. • Replacement of electric or hydronically heated make-up air is not eligible. • Replacement of a variable air volume make-up air unit is not eligible. • Intended for spaces with high ventilation or exhaust loads. • Installation and operation must follow all applicable building code requirements. • Direct fired make-up air unit must serve an occupied space for at least 500 hours per year. • Variable air volume make-up units (H10030) are not eligible for VFD incentives. EQUIPMENT UPGRADES AND RETROFITS Measure Description

Code

Incentive

Unit

Direct Fired Make-up Air Unit, Constant Air Volume

H5081*

$0.25

CFM

Direct Fired Make-up Air Unit, Variable Air Volume

H10030*

$0.35

CFM

* Supplemental Data Sheet needed

NEW CONSTRUCTION AND MAJOR RENOVATIONS Measure Description

Code

Incentive

Unit

Direct Fired Make-up Air Unit, Constant Air Volume

N-H5081*

$0.15

CFM

Direct Fired Make-up Air Unit, Variable Air Volume

N-H10030*

$0.25

CFM

* Supplemental Data Sheet needed

COOLING SYSTEMS DIRECT EXPANSION (DX) SYSTEMS

General Requirements: For equipment <63.33 tons, efficiencies will be verified using the AHRI database (ahridirectory.org). For equipment ≥ 63.33 tons, provide manufacturer performance data sheet indicating that ratings are “at AHRI conditions.” New Construction DX systems are only eligible for incentives up to 450 tons per building. AIR CONDITIONING (A/C) SPLIT AND PACKAGED SYSTEMS < 5.42 TONS Requirements: • Incentive is for the installation of efficient A/C equipment < 5.42 tons (65,000 BTU/hr). AHRI efficiency must meet/exceed SEER2 below. • AHRI verified SEER2 cooling capacity will be used to calculate the incentive. • Systems qualified in the following AHRI Directories are eligible: ‘Air Conditioners and Air Conditioner Coils’ and ‘Variable-Speed Mini-Split and Multi-Split Air Conditioners’ (see ahridirectory.org). • Incentives are for standard HVAC applications only. Rooftop units and split system A/C used for industrial process cooling, ice rinks, and refrigerated warehouses may qualify for a custom incentive. • When used in data centers, rooftop units, and split system air conditioners which are ≤5.42 tons and listed on ahridirectory.org are eligible.

EQUIPMENT UPGRADES AND RETROFITS Measure Description 16 SEER2 A/C Split System or Single Package, <5.42 tons 17 SEER2 A/C Split System or Single Package, <5.42 tons 18 SEER2 A/C Split System or Single Package, <5.42 tons 19 SEER2 A/C Split System or Single Package, <5.42 tons 20 SEER2 A/C Split System or Single Package, <5.42 tons NEW CONSTRUCTION AND MAJOR RENOVATIONS Measure Description

Code

Incentive

Unit

H5423 H5424 H5425 H5426 H5427

$40 $60 $80 $100 $120

A/C Unit A/C Unit A/C Unit A/C Unit A/C Unit

Code

Incentive

Unit

16 SEER2 A/C Split System or Single Package, <5.42 tons 17 SEER2 A/C Split System or Single Package, <5.42 tons 18 SEER2 A/C Split System or Single Package, <5.42 tons 19 SEER2 A/C Split System or Single Package, <5.42 tons 20 SEER2 A/C Split System or Single Package, <5.42 tons

N-H5423 N-H5424 N-H5425 N-H5426 N-H5427

$30 $40 $50 $60 $70

A/C Unit A/C Unit A/C Unit A/C Unit A/C Unit

AIR CONDITIONING (A/C) SPLIT, PACKAGED, AND AIR SOURCE HEAT PUMP SYSTEMS ≥ 5.42 TONS Requirements: • Complete Table B1 of the “HVAC Incentive Catalog Supplemental Data Sheet” for DX Cooling measures and Tables B1 and B2 for Air Source Heat Pump measures. • For the “Part Load Eff. To Qualify” column, use the IEER value listed in the Measure Description below. Example: for a 7.50 ton DX Cooling unit, the “Part Load Eff. To Qualify” would be 16.1 IEER. • For the “Delta Efficiency” column, use “AHRI Rated Part Load Efficiency – Part Load Eff. To Qualify.”

• For the “Incentive Rate” column, use “Additional Incentive + Base Incentive.” • For the “Total Incentive” column, use “AHRI Rated Capacity x Incentive Rate.” • Only complete one line of supplemental data sheet if multiple of the exact same model number were installed. • Provide capacity and performance values to two decimal places. • Variable Refrigerant Flow (VRF) systems may be eligible if performance requirements are met.

• For assistance with determining equipment eligibility and incentive rate, look for the Cooling Eligibility Screening Tool at focusonenergy.com/catalogs . • Incentives are for standard HVAC applications only. Rooftop units, split system air conditioners, and air source heat pumps used for industrial process cooling, data centers, ice rinks, and refrigerated warehouses may qualify for a custom incentive. • Rated AHRI efficiency must meet or exceed minimum ratings shown for EER (if applicable) and IEER. AHRI-verified cooling capacity and IEER will be used to calculate the incentive. • Equipment > 63.33 tons is not listed in ahridirectory.org . For this equipment, provide a manufacturer performance that indicates ratings are “at AHRI conditions.” • For multiple of the exact same model number, complete the Incentive Application as follows: enter qty @ tons each in the # of Units column (example: 3 @ 11.50). • For split systems: • Performance data must be for the “Matched Air Handler” or “Complete System” that includes the condensing unit, evaporator coil, and supply fan. If this data is not available in ahridirectory.org, the manufacturer or Trade Ally must provide modeled or calculated performance data at AHRI conditions for the “complete system,” including expected capacity, IEER and EER (if applicable), to be eligible for this measure. • “Condensing Unit Only” performance data is not acceptable to qualify for this incentive. If only the condensing unit is replaced or the “condensing

unit only” performance data is all that is available, use Split System Air Conditioning - Condensing Unit Only incentive (H3909). • Both the condenser and evaporator coils must be replaced. Refrigerant line diameters must meet manufacturer specifications. • Must include evaporator coil model number. • Air Source Heat Pump Systems must be installed as a “Complete System.” Contact Energy Advisor for partial system installation. EQUIPMENT UPGRADES AND RETROFITS Measure Description Code Incentive

Unit

$25/ton + $5/ ton per 1.0 IEER over min. $25/ton + $5/ ton per 1.0 IEER over min. $25/ton + $5/ ton per 1.0 IEER over min. $25/ton + $5/ ton per 1.0 IEER over min. $35/ton + $5/ ton per 1.0 IEER over min. $35/ton + $5/ ton per 1.0 IEER over min $35/ton + $5/ ton per 1.0 IEER over min

DX Cooling ≥5.42 to <11.25 tons, Min. Eff. = 16.1 IEER (additional incentive on IEER)

H4368*

Ton

DX Cooling ≥11.25 to <20.00 tons, Min. Eff. = 15.4 IEER (additional incentive on IEER)

H4369*

Ton

DX Cooling ≥20.00 to <63.33 tons, Min. Eff. = 14.3 IEER (additional incentive on IEER)

H4370*

Ton

DX Cooling ≥63.33 tons, Min. Eff. = 9.7 EER and 11.4 IEER (additional incentive on IEER)

H4371*

Ton

Air Source Heat Pump ≥5.42 to <11.25 tons, Min. Eff. = 15.1 IEER (additional incentive on IEER)

H10025

Ton

Air Source Heat Pump ≥11.25 to <20.00 tons, Min. Eff. = 14.5 IEER (additional incentive on IEER)

H10026

Ton

Air Source Heat Pump ≥20.00 to <63.33 tons, Min. Eff. = 13.5 IEER (additional incentive on IEER)

H10027

Ton

* Supplemental Data Sheet needed

NEW CONSTRUCTION AND MAJOR RENOVATIONS Measure Description

Code

Incentive

Unit

$20/ton + $3/ ton per 1.0 IEER over min. $20/ton + $3/ ton per 1.0 IEER over min. $20/ton + $3/ ton per 1.0 IEER over min. $20/ton + $3/ ton per 1.0 IEER over min. $20/ton + $3/ ton per 1.0 IEER over min. $20/ton + $3/ ton per 1.0 IEER over min. $20/ton + $3/ ton per 1.0 IEER over min.

DX Cooling ≥5.42 to <11.25 tons, Min. Eff. = 16.1 IEER (additional incentive on IEER)

N-H4368*

Ton

DX Cooling ≥11.25 to <20.00 tons, Min. Eff. = 15.4 IEER (additional incentive on IEER)

N-H4369*

Ton

DX Cooling ≥20.00 to <63.33 tons, Min. Eff. = 14.3 IEER (additional incentive on IEER)

N-H4370*

Ton

DX Cooling ≥63.33 tons, Min. Eff. = 9.7 EER and 11.4 IEER (additional incentive on IEER)

N-H4371*

Ton

Air Source Heat Pump ≥5.42 to <11.25 tons, Min. Eff. = 15.1 IEER (additional incentive on IEER)

N-H10025

Ton

Air Source Heat Pump 11.25 to <20.00 tons, Min. Eff. = 14.5 IEER (additional incentive on IEER)

N-H10026

Ton

Air Source Heat Pump ≥20.00 to <63.33 tons, Min. Eff. = 13.5 IEER (additional incentive on IEER)

N-H10027

Ton

* Supplemental Data Sheet needed

SPLIT SYSTEM AIR CONDITIONING – CONDENSING UNIT ONLY Requirements:

• Complete Table B3 of the “HVAC Incentive Catalog Supplemental Data Sheet” for this measure. • For the “Delta Efficiency” column, use “AHRI Rated Full Load Efficiency” – “Min. Eff. To Qualify.”

• For the “Incentive Rate” column, use “Additional Incentive” + “Base Incentive.” • For the “Total Incentive” column, use “AHRI Rated Capacity” x “Incentive Rate.” • Only complete one line of supplemental data sheet if multiple of the exact same model number were installed.

• Incentive is for the installation of high-efficiency condensing units for use in split system air conditioning systems. The base incentive rate for meeting the minimum efficiency is $20/ton, with an additional $5/ton incentive for each 1.0 EER that the cooling system exceeds the minimum efficiency. For example, a 15.00 ton, 12.1 EER condensing unit would be eligible for a $20/ton + (0.6 EER over minimum x $5/ton) = $23/ton incentive. • For assistance with determining equipment eligibility and incentive rate, look for the Cooling Eligibility Screening Tool at focusonenergy.com/catalogs . • Incentives are for standard HVAC applications only. Condensing units used for industrial process cooling, data centers, ice rinks, and refrigerated warehouses may qualify for a custom incentive. • Rated AHRI efficiency must meet or exceed minimum ratings shown for EER. AHRI-verified cooling capacity and EER will be used to calculate the incentive. • Equipment ≥20.83 tons is not listed in the ahridirectory.org. For this equipment, provide manufacturer performance data sheet that indicates ratings are “at AHRI conditions”. • For multiple of the exact same model number, complete the Incentive Application as follows: enter qty @ tons each in the # of Units column (example: 3 @ 15.00). • Condensing units may be included in the Split and Packaged Systems Incentives (H4368, H4369, H4370, H4371) or the Condensing Unit Only Incentives (H3909), but not both. EQUIPMENT UPGRADES AND RETROFITS Measure Description Code Incentive Unit

$20/ton + $5/ton per 1.0 EER over min.

Split System A/C Condensing Unit Only, ≥11.25 tons, ≥11.5 EER

H3909*

Ton

* Supplemental Data Sheet needed

PRO TIP Additional system strategies include variable speed fans and compressor controls to more effectively use the refrigerant and modulate the temperature and amount of cooled air supplied to the space. See demand controlled ventilation (DCV) and smart thermostats for additional savings opportunities.

Page 1 Page 2 Page 3 Page 4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12 Page 13 Page 14 Page 15 Page 16 Page 17 Page 18 Page 19 Page 20 Page 21 Page 22 Page 23 Page 24 Page 25 Page 26 Page 27 Page 28 Page 29 Page 30 Page 31 Page 32 Page 33 Page 34 Page 35 Page 36