LED INTERIOR SIGNAGE Requirements: • Complete Table A of the "Lighting Incentive Catalog Supplemental Data Sheet" for these measures. • Must result in at least a 30% wattage reduction to be eligible. • LED upgrades from incandescent, HID, fluorescent, or neon interior commercial signage are eligible for this measure. • Applications include, but are not limited to, channel lettering, backlit displays, and menu boards. • Signs illuminated by screw-in or pin-based lamps should refer to replacement lamp incentives on page 16. Signs illuminated by track lighting should refer to LED fixture incentives on page 14. • Clear documentation (i.e. spec sheets, sign schematics, existing ballast, or transformer) of existing equipment or metering data (i.e. voltage and amperage readings) MUST be provided or measure eligibility will be subject to disqualification. For neon signs, a 60% power factor will be assumed for the neon sign transformer unless supporting documentation for a different value is provided. • Replacement lamp products that intend to use existing sockets or lamp holders MUST be reviewed by Focus on Energy prior to installation. • Incentive may be adjusted if existing ballast information is not provided. EQUIPMENT UPGRADES AND RETROFITS Measure Description Code Incentive Unit LED Interior Signage L3903* $0.25 Watt Reduced * Supplemental Data Sheet needed LED STAIRWELL/PASSAGEWAY FIXTURE Requirements: • Must be DLC SSL QPL listed (TRT V5.0 or higher) in the “Stairwell and Passageway Luminaires” primary use category and operate at ≤55W in high/ occupied state. • Replacement of 2-lamp 4' fluorescent fixture with complete, new LED fixture including integrated, remote or on-board occupancy sensor system. • Must utilize a passive infrared and/or ultrasonic occupancy sensor with a fail-safe feature (fails in ON position). • Must operate in low standby light level during vacancy and switch to high light output upon occupancy. Fixture cannot exceed 50% of full wattage during unoccupied periods. • Items not eligible include fixtures whose settings can be overridden and screw-in lamps. • Incentive cannot be combined with other incentives for controls or fixtures. EQUIPMENT UPGRADES AND RETROFITS Measure Description Code Incentive Unit LED Stairwell/Passageway Fixture L3097 $15 Fixture
EXAMPLE LED Interior Signage Use this example when applying for LED Interior Signage. Use as many lines necessary to account for all existing and proposed fixture types. Reference this table when filling out Supplemental Data Table A.
(A) WATTAGE OF EXISTING EQUIPMENT PER FIXTURE
(C) WATTAGE OF NEW
(E) WATTS REDUCED PER FIXTURE (A - C)
(F) INCENTIVE PER WATT ($/WATT REDUCED)
(B) QUANTITY OF EXISTING EQUIPMENT
(D) QUANTITY OF NEW EQUIPMENT
TYPE OF EXISTING EQUIPMENT
REQUESTED INCENTIVE (D X E X F)
TYPE OF NEW EQUIPMENT
LOCATION
EQUIPMENT PER FIXTURE
25' LED strip, 2 watts/ft
$0.25/W reduced
Interior signage 2L F96T12
109
1
50
1
59
$14.75
CUSTOM PROJECT IDEA Talk to your Energy Advisor about custom incentives that may be available for installing low voltage or decorative LED fixtures that do not meet prescriptive measure requirements.
15
Powered by FlippingBook